Low Voltage 1000A Power Distribution Cabinets IEC For 8 Inputs , AC
AC Power Distribution Cabinet,AC power distribution cabinet ,AC
power distribution cabinet ,Switchgear cabinet for on-grid, AC power distribution cabinet for 8 inputs
DC power distribution cabinet for on-grid
AC power distribution box
Detailed introduction to AC / DC Power Distribution Cabinet:
AC / DC Power Distribution Cabinet
The AC and DC power distribution panel is installed on the
communications room, which is the low-voltage distribution
equipment that is with the role of AC and DC power distribution and
security control. With the voltage and current monitoring device,
it can monitor the level of voltage and the dynamic of load current
change at any time.
Concentrating the warning signal on the rack and column cabinet, it
displays the warning signal with sound and light, inputting the
alarm control signal to the General warning of engine room at the
same time. If users need, they can increase the adaptor.
The safety control device uses the imported automatic air switch,
which is small, safe, reliable and prompt action, sensitive, long
service life, while reducing the time of machine fault. The cables
uses the utility bus connections of copper plate, which is more
secure, reliable, generous.
DC Power Distribution Cabinet
Input Voltage: AC200V/380V
Output Branch: It is generally for 18 to 36 slip roads, except for
special requirements. The current can be 3A, 6A, 10A to 80A. The
UPS (uninterruptible power supply system) can be accessed.
AC Power Distribution Cabinet
Input Voltage: DC-48V
Current: ≤600A (the special needs can be up to 1000A)
Output Branch: 20 ~ 40 slip roads. The current can be 6A, 10A, 16A
Warning System: When the load is the overload or short circuit, the
automatic air switch will trip automatically, at this time, the
warning system is sending alarm signals which is visible and heard.
The visible signals are red light, and which indicated the alarm
parts. The audible signal is that the buzzer sound, and which sends
alarm signals to the general Alarm.
This machine is cabinet structure, using the frame structure of
aluminum alloy, which is solid, beautiful, generous, luxurious. In
addition, with four doors, easy of application, spacious enclosure,
Temperature: -5～+40, and the average temperature is within 24
hours, which can not exceed 35
Humidity: 90%(+20), when it is the maximum temperature (+40), and
it can not exceed 50%
Equipment Standard Comparison Table:
Model and Name
DC Power Distribution Panel
According to clients configuration
AC Power Distribution Panel
AC and DC power distribution panel
Place of Origin:
Power Distribution Unit
Intelligent PDU with circuit breakers:
Intelligent Power Distribution Unit
Compliant to International Standards:
Standard IEC PDU
Distribution of AC:
Direct Currency Power Distribution:
Power Distribution Unit (PDU)
Distribution of alternating current (AC) within machine cabinets of
the computer room
Alternating Currency (AC) Power Distribution Cabinet
Indoor distribution cabinet, copper busbar, MCCB, moulded case
circuit breaker, 3 phase, 3 poles, neutral busbar, ground busbar,
volt measurement, ampere measurement, anti-corrosion, dust-proof,
waterproof, input circuit breaker, phases indication, 3 Phase Power
A. Product overview
AC row cabinets is the distribution equipment for the indoor low
voltage power, the protection grade is IP20, it is applicable to
the computer room demanding distribution power supply into multiple
branches, with safety control, monitoring and alarm.
Cabinet body structure: This machine adopts the high-quality
cold-rolled steel sheet as the frame, the outer surface adopts
static electricity powder spray.
The front side has power meter panel in the center, with
configuration of digital electric voltage and current meter and
Display: By pressing the key, you can switch over to display each
line power supply’s each phase current and voltage value.
Alarm function, it includes over-voltage, under-voltage, open
phase, overflow alarm, etc..
Alarm checking mode: optional electric voltage or electric current
Optional function: Surge protector, concentrated line etc.
Applicable electric voltage grade: 3-Phase 5-line system AC380V.
Applicable electric current grade: AC: 630A or below.
Communication method: By RS485 ports; Monitoring address
Power distribution cabinet
2,safe,economic,reasonablenes and reliability
3,AC low voltage
GGD Type AC Low Voltage Distribution Cabinet
Being applicable to the power distribution system of AC 50Hz, rated
working voltage of 380V, rated working current up to 3150A for the
electricity users, such as power plant, substation, factories,
mining enterprises and so on, GGD type AC low voltage distribution
cabinet is used for the purpose of electric-energy conversion,
distribution and control of power, illumination and distribution
equipments. According to the requirements of the energy department,
abroad electricity customers and the design department, GGC type AC
low voltage switchgear product is a new type low voltage
distribution cabinet with high judging ability on the design
principle of safe, economic, reasonableness and reliability. It is
featured with fine dynamic and thermal stability, flexible electric
plan, convenient combination, serialization, high practical
ability, creative structure, etc. It can be used as updated product
for low voltage switchgear assemblies.
GGC type AC low voltage distribution cabinet meets the requirements
of GB7251.1-1997 Low-voltage Switchgear and Control Gear Assemblies.
Fundamental electric parameters
Rated short-circuit breaking current(kA)
Rated short time withstand current
Rated peak withstand current(kA)
Metal-enclosed Low Voltage Withdrawable Switchgear Metal-cald low
voltage power distribution cabinet
3.6-12kv power distribution cabinet /AC380 AC660 drawout low
voltage switchgear /Metal-enclosed Low Voltage Withdrawable power distribution cabinet
/panel/cubicle/enclosure/switchboard cabinet MNS(M) Schneider
MNS is modularized, multi-functional low voltage distribution
switchgear, which is applicable to metallurgy, petroleum, chemical
industrial, industrial and mining enterprises and all the
situations high reliable low voltage system, distribution system
and motor control system are needed.
Our low voltage switchgear can meet your need completely. It is
applicable to all low voltage systems of the current 4000A or
Low voltage electrical panel Standards
Execution standard: IEC60439-1, GB7251.1.
Low voltage electrical panel Advantages
1. Panel board with compact structure, save the volume of cabinet
2. The panel board can be arranged back to back
3. The panel board body can meet the requirements of earthquake
resistance, oscillation resistance and shock resistance
4. It can be built up into different modes freely, such as fixed
type and draw-out type
5. Corresponding protection class of the panel board body could be
designed according to the different requirements of the job and
6. Select and using standard component entirely, convenient for the
design of project planner.
7. The arrangement of power distribution circuit is economic
8. With anti electric arc design
9. Convenient for equipment upgrade and improvement
10. The panel board is free of maintenance to the most extent.
11. Safe for the operator
12. Reliable enough and high flexibility.
low voltage electrical panel Installation dimension
1. The fixed cabinet:
Width: 600mm, 800mm, 1000mm
Depth: 600mm, 800mm, 1000mm
2. The withdrawable cabinet:
Width: 600mm, 800mm, 900mm, 1000mm(600mm not suggested)
Depth: 600mm, 800mm, 1000mm(600mm not suggested)
3. The fixed isolating cabinet
Width: 600mm, 900mm, 1000mm
Depth: 600mm, 800mm, 1000mm
Rated operational voltage
Rated insulation voltage
Ratd voltage of auxiliary circuit
Maximum coil in and out broken circuit
Horizontal busbar rated current
Vertical busbar rated current
Horizontal busbar ratd shorttime withstand current
Horizontal busbar rated peak value withstand current
Vertical busbar rated short time withstand current
Vertical busbar rated peak value withstand current
Metal-cald low voltage power distribution cabinet
Electric Switchgear Cubicle Cabinet Fixed Type Electrical
Switchboard Switchgear Manufacturers ABB Switchgear
1,the box adopts fully sealed waterproof structure, surface powder
coating processing, strong anti-rust, anti-corrosion ability.
2, High quality internal air switch, has good function of
over-current and overheating protection.
3,Integration of lightning protection, electrical measuring, and
4 Can monitor various parameters, the switch state, and
long-distance monitoring through 485-communication interface to
upload to the server room.
The increasing demand of energy, the exhaustion of fossil fuels and
the continuously serious pollution makes the effect of renewable
energy of vital importance. As one source of renewable energy,
solar energy is playing a more and more important role.
Solar can be transformed into electricity that can be used directly
or fed into the grid according to national policy. Longmax
Technology is focused on developing and offering technology and
products for sustainable solar energy development. Our solar
In the field of sustainable renewable photovoltaic energy, our core
competencies products include:
Solar combiner boxes, AC/DC distribution cabinets/boxes,
intelligent monitoring devices, portable AC/DC solar generators,
multi-function power systems, environmental monitoring instruments,
PV prevent reverse diodes and monitoring systems used in PV power
Our history is full of firsts and our products are installed in a
huge number of solar power plants all over China and the world.
Till now, the total installed capacity of Longmax is over 2GW
Our customers include entities and enterprises dedicated to the
renewable energy field, solar power plants and agents/distributors
around the world who are interested in the new PV industry.
AC / DC Power Distribution Cabinet,AC power distribution cabinet ,DC power distribution cabinet